Beeter Blackend Mk III

Meet the Beeter Amplification Blackened Mk III

The Beeter Blackened is a very high end all tube amp that delivers all natural sound with a tone that will make it very hard for you to shut off.

One of the first things you will notice is the lack of hiss (hum) on any channel.  It's so quiet you won't know it's on until you start playing.  The tone is pure making the ability to hear each note in a chord evident.

We developed the power circuit by using a unique approach to how we wanted our power distributed.  We more or less designed a power circuit similar to something you would find in high-end medical equipment.  We wanted to keep interference to a minimum so the power circuit would not take away from the tone and quality of the guitar that was plugged into it.  This approach helped create our ultra-quiet, hum free amps.

On the other end of the spectrum we designed the gain stages of the preamp to emphasize everything we loved about electric guitars and the various tones you could make with them.  Through the gain stages we establish a very diverse tone while also maintaining all the natural harmonics the guitar has.  Essentially making the amp virtually free of tone loss.

Each component used in this amp was specifically picked for the best possible performance and tone.  We do not bargain-bin shop for our parts.  We use only the best.

Each wire is carefully placed and soldered by hand using the best possible wire alloy and lead free solder available.

What does it sound like?

Channel 1 - This channel basically is a Marshall Plexi style sounding channel with a little more punch.  With the gain is set to less than 7, you can generate sounds you hear popular on Country songs or Blues.  You can get very clean sounds like a Fender Twin Reverb.  If you go beyond 7 you will start to hear something similar to AC/DC or Rainbow (Ritchie Blackmore). 

Channel 2 - On the left side of the amp there is a gain switch that switches the amp to channel 2.  Now the fun begins. With a flip of the switch you now have tones similar to those you hear on the vintage Van Halen records but much more than that.  There will be more bass response and it is a richer sounding tone.  This is one of my favorite settings for this amp.  Incredibly, the amp comes to life in a manner you would not expect by going about your settings in a different way.  Try the gain maxed out in this channel and use your guitar volume pot as the gain control.  Try playing at ¼ volume and adjust to your specific taste.  You will get incredible tone and the responsiveness is something you must witness to believe.  Notes just leap out of your guitar.

Channel 3 - This is the all-out run for your life gain channel.  This is a favorite of many players.  All the gain you will ever need resides within this channel.  The tones of all the legendary heavier players are easily dialed in and will exceed your expectations.  Often used as a “lead” channel.  Notes will sustain for days and chords will release a fury that will give you goosebumps. 

The Beeter Blackened MkIII is continually outshining other top amp manufacturers in side-by-side tests.

In manufacturing practices and quality of craftsmanship, we are yet to see another amp company that is even close to being in our league. 

"I have heard it said that this amp will melt your face! Not a bad compliment if you ask me." – Ross Enge, Owner, Beeter Amplification.

Tubes: (5) 12ax7 Preamp Tubes, (4) 6CA7 Power Amp Tubes.

Beeter Blizzard

The Beeter Blizzard is a special edition classic version of the vintage late 70's early 80s tone made famous by the top players of the day. 

With a very strategic gain stage added to the classic design and enhanced bass response, this amp is tighter and meaner than anything you could have bought back in the day.

Because of the added gain and the way it is placed in the circuit, playing hard rock, heavy metal, modern country or the blues is just a dial away.

Super sweet tone followed by the ultimate responsiveness of the classic 60's plexi's.

Available in Blizzard White only.

This amp is a single channel amp.

Effects loop is optional for an additional charge.

Blackend Mk II Preamp

The Beeter Blackend Preamp is the preamp we use in out heads.  It features all the best components we use in our heads and the same quality craftsmanship.  We spare no expense making our products the best they could possibly be.